Category: latexpatterns

Latex patterns using Seamly – Inflatable hip shorts

Make your own latex inflatable hip shorts adjusting the pattern provided with Seamly2D!

It may seem daunting but it’s fairly straightforward and there are no complex tight curves. I’d say it is about as complex and about as much time (and material) as making a catsuit. What you really need is patience.

I’ve made a pattern using Seamly2D, free and open source software for pattern creating. You can enter your own measurements and with a few tweaks I explain pop out a pattern.

Full instructions on how to do this in the attached PDF file you can download, along with the Seamly files you’ll need.

kigyui-latexpatterns-inflatablehips.pdf

kigyui-latexpatterns-inflatablehips.zip

Was it useful? Mail me and let me know.

Latex Patterns using Seamly – Pocket Top for holding breast forms

I’ve been searching for the perfect latex catsuit that has pockets to hold silicone breast forms. You can buy catsuits like this from a variety of sellers but they all have their disadvantages. Some have just pockets on the back of the latex which have trouble with the weight of large forms. Some don’t do made to measure or have fixed breast form pocket sizes. Others take many months for delivery and returns are impossible. Some are expensive (and more expensive suits are not always the best).

So can we come up with a design that takes the all the best design ideas, make it fairly simple to pattern and construct, and then make the pattern free and available for all?

I’ve made a pattern using Seamly2D, free and open source software for pattern creating. You can enter your own measurements and with a few tweaks I explain pop out a pattern.

Full instructions on how to do this in the attached PDF file you can download, along with the Seamly files you’ll need.

kigyui-latexpatterns-pockettop.pdf

breastpockettop_yui.zip

Was it useful? Mail me and let me know.

Latex patterns using Seamly – BHG Leggings test

Latex Patterns for Butt-Hip-Gaff Leggings

I’ve been searching for the perfect latex leggings. My ideal leggings will, in a single item

  • Hold in silicone hip pads
  • Act as a Gaff, but allow toilet breaks
  • Hold in foam butt pads
  • Give a nice butt definition

So can we come up with a design like that? This is my first attempt. It’s based on a duct-tape pattern but I’ve modified the pattern so it should be able to scale to measurements. It’s not as refined a work as my pocket-top, so you’ll need to do some work to get a nice pattern out of this.

I used

* 0.4mm latex in black for the main parts
* 1mm latex in black for the gaff part
* A random zip I had handy

For the prototype I only made the leggings extend to just above the knee (because I ran out of black .4mm latex). A future prototype will include full legs too.

I’m probably 70% happy with the design as it stands; it’s better than anything else I’ve owned. I do feel we can make it even better though.

Download: kigyui-latexpatterns-bhgleggings.zip